The structure of the billet induction heating equipment determines its advantages, please see the introduction below：

The billet induction heating equipment heating device has the advantages of small size, light weight, high efficiency, excellent thermal processing quality and favorable environment. It is rapidly eliminating coal-fired furnaces, gas furnaces, fuel oil furnaces and ordinary resistance furnaces. It is a new generation of metal heating equipment.

The principle of the billet induction heating equipment is electromagnetic induction. Its heat is generated in the workpiece itself. The method of use is simple. No professional furnace workers are required to perform the furnace and seal the furnace in advance. The ordinary workers can use it on their own, and the heating speed is very fast. The hot work of casting can be completed within ten minutes. The production efficiency of this intermediate frequency furnace is high, so there is no need to worry about the waste of the heated billet of the coal furnace caused by power failure or equipment failure. Due to the rapid heating rate of this heating method, there is very little oxidation. Compared with coal-fired furnaces, at least 20-50 kg of steel raw materials are saved per ton of forgings, and the material utilization rate can reach 95%, which saves materials better. The heating method of the intermediate frequency furnace is uniformly heated, and the temperature difference of the core surface is extremely small, so the life of the forging die is also greatly increased in forging, and the surface roughness of the forging is also less than 50um. The induction heating of the intermediate frequency furnace generates its heat in the workpiece itself, so the heating is uniform, and the temperature difference of the core surface is extremely small. The application of temperature control system can achieve precise temperature control and improve product quality and pass rate.

The billet induction heating equipment is the most energy-efficient heating method in the electric heating furnace. The power consumption per ton of forgings heated from room temperature to 1100 ° C is less than 360 degrees. Compared with the coal stove, the induction heating furnace will not cause workers to be roasted and smoked under the hot sun. It has no pollution and low energy consumption. It not only protects the environment but also improves the labor environment and company image of workers.